Single Slider Tilt

Call for Price

Single Slider Tilt windows consist of one operating sash and one fixed sash. The operating sash slides from side to side for ventilation and tilts inward from one side for easy cleaning. Single slider tilt windows are an efficient and economical solution for larger openings as the centre fixed rail offers structural integrity. They are often also used for basement window applications.

Clear

Description


Single Slider Tilt Features

  • Multi-chamber frame provides strength and added energy efficiency
  • Double wall pull rail for structural integrity
  • Internal glazing stops for added security
  • Enhanced pocket cover with bulb seal to reduce air infiltration
  • Internal reverse weep covers to allow excess water drainage while preventing air infiltration
  • Operating sash tilts inward for easy cleaning from inside

 


Standard Sizes

  • Width – minimum 32”, maximum 72”, available in 1/8” increments
  • Height – minimum 16”, maximum 60”, available in 1/8” increments
  • (sizes below or above min/max may be available – contact dealer for details)

Energy Efficiency

GlazingEnergy RatingU-FactorVisible TransmittanceSolar Heat Gain Coefficient
3mm PPG Clear / SG400301.790.610.53
3mm PPG SG400 / Clear281.790.610.50
3mm PPG SB60 / SG400211.640.550.32
3mm PPG Clear / SB70XL201.630.500.30
3mm PPG SB70XL / Clear151.630.500.22

Single Slider Tilt Warranty Policy


Maintenance Tips

  • Wash using a soft cloth or ordinary-handled soft bristle brush.
  • For difficult to remove dirt and stains such as topsoil, lithium grease, crayon, felt-tip pen, caulking, lipstick, grass, bubble gum, mold and mildew: use the readily available household cleansers on the suggested list below. Always follow the manufacturer’s directions on cleansers.
  • Do not use mildly abrasive cleaners such as Ajax®, Bon Ami®, etc. These or any abrasive materials could have a negative effect on the surface of glass and window frames.
  • Do not use cleansers containing aggressive organic solvents because they could affect the surface appearance of the vinyl. Examples of such cleansers are chlorine bleach, liquid grease remover, nail polish remover and furniture polish/cleansers.
Cleaning Screens
  • Follow exterior surface cleaning instructions for all exterior screens. Interior mounted screens can be vacuumed with a soft brush attachment or wiped with a soap and water solution. Use caution when removing and handling insect screens. Torn insect screens or bent screen bars are not covered by warranty.
  • An easy way to clean an insect screen is to remove it and lay it down on a flat surface. Apply a cleaning solution to the screen and let it soak for a minute. Then, rinse the screen using a low-pressure spray, such as a garden hose.
Cleaning Glass
  • Apply a mild soap or vinegar-based cleaner to the glass, by spraying or using a clean, grit-free cloth or sponge saturated with cleaning solution. Avoid using ammonia or alcohol-based cleaners, which can cause streaking. Be careful not to damage glazing, frame finish, wood components or insulating unit seals by overgenerous application of cleaners.

Additional information

Interior Options

Accessory Groove Cover, Celuka Jamb Extension, Drywall Return, Solid Oak Jamb Extension, Solid Pine Jamb Extension

Exterior Options

Accessory Groove Cover, Brickmould, Frame Extension, Nail Fin only, Sloped Sill

Grille Options

1-1/4" SDL, 1/4"x5/16" Square – Brass, 1/4"x5/16" Square – Pewter, 1/4"x5/16" Square – White, 2" SDL, 3/4 Georgian White, 5/8 Flat – Black, 5/8 Flat – Brass, 5/8 Flat – Pewter, 5/8 Flat – Two-Tone, 5/8 Flat – White, 7/8" SDL, Pencil – Brass, Pencil – Pewter, Pencil – White

Hardware Options

Self-Locking window latch

Screen Options

Half

Reviews

There are no reviews yet.

Be the first to review “Single Slider Tilt”

Your email address will not be published. Required fields are marked *