Double Hung Tilt

Call for Price

Double Hung Tilt windows consist of both the upper and lower sashes that slide up and down for ventilation. The full, exterior mounted screen allows for venting at the top or bottom, independently or at the same time. Both upper and lower sashes tilt inward for easy cleaning. Wardco double hung windows achieved the highest air infiltration rating possible – A3. Great performance and elegant design make the Wardco double hung tilt window an excellent choice for any application.



Double Hung Tilt Features

  • Multi-chamber frame provides strength and added energy efficiency
  • Double wall pull rail for structural integrity
  • Internal glazing stops for added security
  • Enhanced pocket cover with bulb seal to reduce air infiltration
  • Internal reverse weep covers to allow excess water drainage while preventing air infiltration
  • Upper and lower sashes tilt inward for easy cleaning from inside

Standard Sizes

  • Width – minimum 16”, maximum 48”, available in 1/8” increments
  • Height – minimum 32”, maximum 80”, available in 1/8” increments
  • (sizes below or above min/max may be available – contact dealer for details)

Energy Efficiency

Glazing Energy Rating U-Factor Visible Transmittance Solar Heat Gain Coefficient
3mm Clear / CG80/70 31 1.71 0.61 0.53
3mm Clear / CG80/70 Foam 31 1.69 0.61 0.53
3mm Clear / Sungate 400 29 1.76 0.59 0.51
3mm Clear / Sungate 400 Foam 29 1.75 0.59 0.51
3mm CG70/36 / Clear Foam 20 1.60 0.53 0.30
3mm CG70/36 / Clear 19 1.62 0.53 0.30
3mm CG62/27 / Clear 15 1.61 0.47 0.21
3mm CG62/27 / Clear Foam 15 1.59 0.47 0.21

Double Hung Tilt Warranty

Maintenance Tips

  • Wash using a soft cloth or ordinary-handled soft bristle brush.
  • For difficult to remove dirt and stains such as topsoil, lithium grease, crayon, felt-tip pen, caulking, lipstick, grass, bubble gum, mold and mildew: use the readily available household cleansers on the suggested list below. Always follow the manufacturer’s directions on cleansers.
  • Do not use mildly abrasive cleaners such as Ajax®, Bon Ami®, etc. These or any abrasive materials could have a negative effect on the surface of glass and window frames.
  • Do not use cleansers containing aggressive organic solvents because they could affect the surface appearance of the vinyl. Examples of such cleansers are chlorine bleach, liquid grease remover, nail polish remover and furniture polish/cleansers.
Cleaning Screens
  • Follow exterior surface cleaning instructions for all exterior screens. Interior mounted screens can be vacuumed with a soft brush attachment or wiped with a soap and water solution. Use caution when removing and handling insect screens. Torn insect screens or bent screen bars are not covered by warranty.
  • An easy way to clean an insect screen is to remove it and lay it down on a flat surface. Apply a cleaning solution to the screen and let it soak for a minute. Then, rinse the screen using a low-pressure spray, such as a garden hose.
Cleaning Glass
  • Apply a mild soap or vinegar-based cleaner to the glass, by spraying or using a clean, grit-free cloth or sponge saturated with cleaning solution. Avoid using ammonia or alcohol-based cleaners, which can cause streaking. Be careful not to damage glazing, frame finish, wood components or insulating unit seals by overgenerous application of cleaners.

Additional information

Interior Options

Accessory Groove Cover, Celuka Jamb Extension, Drywall Return, Solid Oak Jamb Extension, Solid Pine Jamb Extension

Exterior Options

Accessory Groove Cover, Brickmould, Frame Extension, Nail Fin only, Sloped Sill

Grille Options

1-1/4" SDL, 1/4"x5/16" Square – Brass, 1/4"x5/16" Square – Pewter, 1/4"x5/16" Square – White, 2" SDL, 3/4 Georgian White, 5/8 Flat – Black, 5/8 Flat – Brass, 5/8 Flat – Pewter, 5/8 Flat – Two-Tone, 5/8 Flat – White, 7/8" SDL, Pencil – Brass, Pencil – Pewter, Pencil – White

Hardware Options

Self-Locking window latch

Screen Options



There are no reviews yet.

Be the first to review “Double Hung Tilt”

Your email address will not be published. Required fields are marked *